Witura Corporation Sdn. Bhd.

WT-1018C1 GSM Cellular Terminal

The Fixed Cellular Terminal PBX connectivity terminals offer a simple, cost saving solution for utilizing the benefit of GSM through your landline phones. The FCT is a simple, cost saving solution, which serves as a gateway between a GSM network and a company’s private branch exchange (PBX)

The fixed wireless terminal can route incoming and outgoing calls via the mobile telephone network, providing a cost effective alternative for fixed to mobile or mobile to fixed telephone calls. Not only do your save in landline to GSM charges, but you can also exploit GSM feature in your landline environment

1. Slash your GSM-Targeted call costs
2. Make the most of GSM features and services
3. Avoid delay and expense of landline installation
4. Easy to install, configure and maintain

The GSM Terminal serves as a gateway between a GSM network and your company's private branch exchange. The GSM Modem can be connected to either the trunk or extension connector of a PBX, allowing for its use on the analog extension of an ISDN PBX or with analog PBXs. The PBX can be configured to automatically use a trunk-connected FWT with mobile-targeted calls. The system capitalizes on discounts of cellular tariffs, compared to the DOT on long distance calls. The system accesses the cheapest available route for the outgoing call from the database that is allowed through the system.

There are varied applications where in the utilities of the system can be applied.

Applications: Cheaper calls between

1. Office <--> Office
2. Office <--> Warehouse
3. Office <--> Branches
4. Office <--> Customers

Following are the cost saving benefits that can be capitalized using Fixed Cellular Terminal on the Epabx FOR Outbound STD/ISD CALLS:

1. For all outgoing calls to any mobile number of GSM operator (likes
    Vodafone, MTN,T-Mobile and other ) a flat rate of USD0.05 – USD0.20 is
    offered, therefore if 5,000 minutes of calls are made to outstation call
    mobile numbers i.e. 0.30 cents per call, the Telecom landline STD bill would
    amount to average of over USD 1,5000/- per month as against the same
    would be under USD500 – USD1,000/- using the FCT system connected to
    the EPABX. THIS CAN RESULT IN COST SAVING OF 50% on ALL STD call
    cost to any mobile number.
2. For telecom landline International Calls (IDD), for example the rate
    between USD0.50 – USD4.00 to any country of the world whereby
    assuming 1000 minutes of IDD call the bill would be USD500 – USD2,000
    as against the same can be USD0.30 – USD0.50 effective of over 1000%
    on International (IDD) call costs.

Following are the cost saving benefits that can be capitalized using Fixed Cellular Terminal on the Epabx for GSM Network

1. Whenever any outbound calls are made from the any corporate office from
    the desk phone to any GSM operator mobile phone, Subscriber the call will     be routed through the FCT unit connected to the EPABX whereby your
    company will only pay for USD 0.15 that would have been the cost
    per minute. We estimate a call traffic of at least 400-500 minute daily
    thereby the customer only paying USD60-70 per day compare to landline
    where is USD0.30 and need to pay for at least USD120 - 150 per day
2. Similarly in the inbound call traffic scenario whenever any GSM Operators
    customer is not in the office and wants to speak to any employee without
    the mobile, he/she simply dial the designated telecom line in the office
    which will ring on the EPABX and further can any extension can be
    reached through the IVR whereby need to pay USD0.15 per minutes to
    landline for the outgoing call. With the GSM terminal, your company incurs
    no charges at all. This is because some of the GSM operator offer calling to
    the same operator with no cost. For examples calling from GSM main line
    to sub–lines with extra charges. We estimate huge savings here with
    inbound call traffic of 500 minutes from multiple GSM callers; the company
    can save at least USD 80 per day. i.e USD 2,400 per month

From the research, we understand that each company spending more than 80% of their total calls to mobile phone instead of landline to look for sales personal, his manager or his boss. By utilized Witura WT-1018 GSM fixed wireless terminal, a great saving will be achieved.

The GSM terminal is intelligent to provide least cost call routing (LCR). When customers calling local city call which is USD0.04 compared to Telco at USD0.10, the unit will dial using telecom line to call out instead of GSM network

Key Features

- Provides stronger signal
- Options for allowing incoming call
- Options for locking terminal, SIM card
- Ability to add local area code automatically
- Flexible set up
- Ability to bar numbers
- Options for line reversal functions

Technical Specifications

- Environmental Temperature: 0 ~ +50ºC
- Relative Humidity: 10% ~ 85%
- Air Pressure: 86Kpa ~ 106Kpa
- Environmental Noise: <= 60dB(A)
- Working Frequency: GSM 900/1800MHz or GSM 850/1900Mhz
- Stability of Frequency: better than 2.5PPM
- Signal Sensitivity: -103dBM
- Transmit Power: <2W
- Power Adapter: Input: AC110-240V, 50/60Hz. Output: DC12V, 1.5A

User Manual For WT-1018

Setting Instruction For WT-1018