Products - GSM For Remote Telemetry
WT-9001 IP65 GSM Remote Control And Alarm SystemWT-9001 IP65 GSM Remote Control And Alarm System allows you to use your mobile phone to monitor and control your business from any location. Its alarm facilities provide a flexible way to distribute critical alarm information to any number of mobile phone users. WT-9001 IP65 can monitor 8 digital switch inputs. A SMS alarm message can be sent when inputs exceed preset limits. The user can also interrogate the inputs through SMS messaging. The WT-9000 Series also has 8 relay outputs which can be activated via SMS and used to switch lamps, pumps, heaters etc. The WT-9000 IP65 is complete with an LCD display, back up battery and built-in Quad-Band Modem |
WT-9002 IP65 GSM Intercom And Access Control SystemWT-9002 IP65 is part of the gate automation systems allow you to open your gate with your mobile phone without any cost This system allows up to 1000 registered users to open any garage door / gate with their cellular phone or landline phone with no cost of a call to the user - Absolutely Free of Charge! Simply dial the mobile phone number in the WT-9002 IP65 for your gate from any phone or mobile-phone and the gate will open without any cost of a call to you. The WT-9002 IP65 has a wireless intercom in front of your gate that includes a speaker, microphone and a "Call" push button. When the "Call" push button is pressed by visitor (at the gate), the system will call the owner's phone number automatically allowing him to speak with the visitor. The owner can open the gate and let the visitor in by pressing the passwords on his cellular phone. |
WT-009 GSM Remote Control DeviceWT-009 IP65 is a device to be installed in parallel of the low voltage opening button of an electric gate to enable it to be opened by means of a GSM phone. It has a relay whose contact has to be connected in parallel with the button which opens the gate. It has a White List of numbers who are enabled to open the phone, up to 99. When the WT-009 GSM Remote Control Device receives a call, it will check to see if the calling number is in the list. If it is in the list it will reject the call (so there will be no charge – at least with today’s charging procedures) and click the relay momentarily |





