GSM Lift Emergency Voices & Monitoring System (Model: WT-1010LM)

The GSM lift emergency voice modem is for the two ways emergency communication between people trapped in a lift’s cabin. The device uses GSM or 3G SIM cards connects to the emergency lift phone. When a trapped passenger activates the lift alarm button, the WT 1010LM will call the predefined telephone number. The unit works perfectly with any emergency lift phone in the market.

GSM lift emergency voice system applies because GSM call cost is better than landline and no monthly fixed charges. This system also applicable in every building where there is no person who monitors lift’s condition constantly. It is the ideal solution for companies which have greater number of lifts – all they need is one telephone number (e.g. mobile phone’s) on which messages and voice connections will be transferred.

The unit also suitable for offer temporary communication solutions at construction sites where the telephone line has not yet been installed.

The unit also the reporting and monitoring system provides monitoring the working status of lift and escalator over GSM network. When there is a failure or power failure, the WT-1010LM GSM unit will automatically generate SMS alert to the pre-programmed telephone number (up to 8).

It can monitor up to 8 digital inputs. A pre-programmed alarm message can be sent to the pre-programmed phone number when lift or escalator failure. The lift company can control the 2 relay contact by SMS to re-set the ELCB, on/off the switch button.

The service centre can send and receive from GSM gateway lift system via contact id. If the elevator blocks, GSM gateway lift is always active due to the built in rechargeable battery.

The device configuration is performed via PC programming, or remotely via SMS. You can remote manage the device. At any time it will be possible to remote query the GSM signal quality.

Features

- Support Dual-Band or Quad-Band GSM Network
- Can connect to Lift Phone for emergency call 
- 2 Digital Inputs and 2 Relay Outputs 
- Programming can be done by PC (Software) or SMS (Remotely)
- Monitoring by SMS Mobile Phone or Software
- Alert Notification via SMS (up to 8 telephone numbers)
- Send pre-programmed SMS when lift or elevator failure
- Frequency Band: 900/1800Mhz or 850/900/1800/1900Mhz
- Able to monitor up to 500 units with Software Monitoring
- Digital Alarm Inputs can be used to send SMS alarms
- Backup Lithium Rechargeable Battery