All In One Telephone and Security Alarm System (Model: WT-1010SA)

WT-1010SA as a Burglar Alarm System Witura’s GSM Alarm System can cover 48 alarm zones within the premises. In addition, the unit can be connected to window breaking sensors, motion detectors and other alarm triggers. Once triggered, alerts can be sent to 8 pre-set numbers. The SMS alarm unit also comes completed with 3 sms remote control zones. Through this, you can activate a number of electrical appliances and equipment like the air-conditioner, generator, sensors, and lighting remotely via sms or phone call. Using this service can help in theft prevention as lighting can be switched on or off remotely to give the impression that there are people on the premises. If the premises comes with an auto gate, the WT-1010SA GSM alarm system can also be used to open/close the gate via either the remote control unit or via a command through the telephone unit.

The SMS alarm system comes with 2 remote control units to arm and disarm the burglar alarm system. These remote control units are also multi-functional and can be used not just for arming and disarming the security alarm system, but also as an emergency/panic button, as a remote to open the garage door/ main gate, to switch on/off electrical appliances within the home. Another feature of the WT-1010SA is that the GSM alarm can be armed and disarmed remotely using the mobile phone.

As the WT-1010SA SMS alarm works on a wireless system, the risk of thieves ‘cutting’ the connection is low as there are no wires to connect the unit to the telephone line. Even if the thieves use a GSM ‘jammer’ to cancel the wireless signal, the WT-1010SA SMS alarm has been designed to overcome this. When a GSM ‘jammer’ is detected, the unit will automatically send out a sms and trigger the alarm siren.

To ensure that in cases of power failure or if the power supply has been ‘cut’ by thieves, the WT-1010SA burglar alarm is equipped with a standby rechargeable battery to ensure that the unit continues to function. In the event of power cut, the unit will again automatically send out a sms to the pre-set mobile number to inform that the battery has failed. Another feature of the WT-1010SA GSM intruder alarm is the auto test reporting system whereby the system will, at the programmed time, test to ensure that the system is ‘alive’. A message is then sent to the pre-set mobile number. This auto test ensures that the security alarm system is constantly functioning.

WT-1010SA as a Telephone System

Let’s face it, installing a new phone landline can be a nightmare. From the moment you apply till the time the line is installed, it could take a long while as the date of installation is determined by the availability of personnel from the telephone company. While waiting for installation, there is also the inconvenience of not having a communications line available.

Installation of a landline telephone system also normally involves the payment of a deposit, which could be a significant amount of upfront expenditure if it’s for a business premises. Apart from the deposit, there’s also a month phone line rental regardless of whether or not calls are made.
When the time is ready for installation of the landline telephone system, for aesthetic purposes, there might be small renovations involved. This will incur additional costs.

The WT-1010SA unit can also be connected to a basic telephone and used to make phone calls. Using the WT-1010SA as a telephone system has many advantages over traditional landlines.

Firstly, all that’s needed to activate the phone line is a GSM SIM card which is easily applied for can be used almost immediately. The system works with both prepaid and postpaid SIM cards.

In today’s communications environment, many phone calls are made to mobile lines. Mobile phone operators normally have plans that offer very low cost or complimentary calls within the same network. By using a GSM based phone for your premises, it can help to save on your monthly phone bill as there is no monthly phone line rental costs to bear and calls made between landline and mobile lines normally cost more too.

The WT-1010SA GSM alarms and telephone system offers the perfect solution for those who are renting their premises. Apart from the upfront and on-going savings, when the lease is over, the system can be very quickly dismantled ready to install in your new rented premises.

Features:

• Eight Alarm Inputs: The system has the function to send sms and call to the user in the even of input triggered. For example, Zone 4 connected to an electrical door, when there is intruder or electrical door is open illegally, WT-1010SA GSM alarms will receive short circuit impulse on Zone 4 and automatically sends a signal to the pre-set number and notify the owner.
• It is possible to arm/ disarm the unit remotely via SMS or phone call. Alternatively, it also can connect to the basic telephone to perform arm/disarm. Remote control also will be provided
• Input alarm zoning can be edited and programmed up to 50 characters long.You can use this function to program any languages. You can change the displayed text by sending a command by SMS to the unit. For examples, changing the Zone 4 to “DOOR OPEN”
• Three SMS remote control output. These open collector outputs (that can sink max 300ma per output) can be turned on and off remotely through a SMS or phone call. The SMS remote control will be reachable by sending a SMS or phone call with a certain command. For example sms/ call in to switch on lighting, air conditional, generator, sensor or other equipment
• Automatically call to 8 pre-programmed phone numbers while alarming. The WT-1010 GSM intruder alarm also will SMS to 8 programmable phone number to notify the user if any intruder
• Open your auto gate with your basic telephone. Connect the WT-1010 with the auto gate and your house basic telephone. Besides you can use the WT-1010 as your house telephone, you also can open your auto gateway by pressing a command at the basic telephone or remote control which we provided
• Most of the countries, GSM Mobile operator offer cheaper call plan compared to telecom landline. The WT 1010 GSM home alarm can connect to the basic telephone to make call. If any intruder, the WT-1010 SMS alarm will cut the telephone call and sent the alarm messages first.
• In order prevent professional thief to disconnect GSM home alarm by using “GSM Jammer”, the WT-1010 security alarm will transmit the alarm if signal drop immediately and trigger the siren
• The owner will automatically receive the SMS text messages for “Battery Fail”, “Telecom Line Fail”, “AC Fail”, “INPUT 1 – INPUT 4 Fail”, “GSM Alive” if any of the above having problem
• Auto test reporting system – after the owner program the reporting time, the WT-1010 home alarm will dial the programmable number to inform that “GSM Alive”. This is to make sure that in case of emergency, the GSM home alarms still will function well
• Standby recharger battery to prevent power failure or electricity cut off by intruder. The GSM home alarm will function as normal when no electricity supply. LCD display to check the GSM signal strange and battery capacity