3G, GSM Fixed Wireless Terminal (Model: WT-1018)

For PBX vendor and Discount Call Company;

The Witura WT 1018 GSM gateway can be connected to either the trunk or extension connector of a PBX, allowing for its use on the analog extension of an ISDN PBX or with analog Private Branch Exchange. The PBX can be configured to automatically use a trunk-connected fixed cellular terminal with mobile-targeted calls. This fixed wireless terminal taking advantage of the CUG (Closed User Groups) offer from the GSM operator and provide discounts on the cellular tariffs. The system accesses the cheapest available route for the outgoing call from the database that is allowed through the system to achieved least cost call routing (LCCR)

There is so many fixed wireless teminal with very low cost in the market, what does Witura specially design the GSM gateway which can use with the various Private Branch Exchange (PBX) system such as Penasonic, NEC, Siemens, Samsung, LG and a lot more in the market?

1. Firmware specially design for echo cancellation for excellent voice quality
2. Caller ID presentation in DTMF mode. Design either block sending or overlap sending to cater for different PBX system in the market and different situation
3. Inter-digit time out adjustable
4. Build in line reversal function
5. Ability to add in local area code or prefix automatically
6. Ability to automatically select PSTN line or GSM network achieved least cost call routing (LCCR)
7. Backup battery for suddenly electricity cut off. LCD display on the fixed cellular gateway to indicate the signal strength.
8. Incoming & Outgoing caller ID mapping. Phone directory stored in
the gsm gateways, when received the gsm mobile number, it will
automatically map to the landline number.

And a lot more of added features which we gathers our experience from the worldwide PBX vendor and discount call company.

The installation and maintenance of traditional Private Automatic Branch Exchange (PABX) system is competitive in the market. A prices war is not the solution for the business. If PABX vendors able to work out the additional solution and ROI calculation on the discount call using the system, this will give great advantage to maintain the competitive edge in the market.

The basic function of GSM Gateways use in the Private Automatic Branch Exchange (PABX);

From the research, we understand that each company spending more than 60 % - 80% of their total calls to mobile phone instead of landline to look for sales personals, his managers or his bosses. If you have Witura WT-1018 GSM fixed wireless terminal install at the back of the Private Branch Exchange (PBX), a great saving will be achieved.

There is a great saving of telephone bill if calling from Mobile to mobile or mobile to landline compared to landline calling mobile. If you have a fixed cellular gateway installs at your Private Automatic Branch Exchange (PBX) system in your office or home, not only you can have saving in the telephone bill, you can grab the full advantage of CUG (Closed User Group) as being offered by mobile operator. For example, friends & family mobile plan can allow you to call your staffs, manager and company director for FREE. (depend on your gsm operator call rate tables)

There are various applications where to achieved cheaper calls or free call can be applied.

1. Office <--> Office
2. Office <--> Warehouse
3. Office <--> Branches
4. Office <--> Customers

For examples, if you have more than 10 branches all over the country, and you know that every branches need to communication more than 100 calls per days. The fixed cellular gateway will help to cut a lot in the telephone bills;

100 calls x 0.30 landline charges = USD 30.00 / per day

100 calls x 0.10 GSM charges = USD 10.00 / per day

100 calls x free call under same friends & family plan or CUG (Close user group) = USD 0 / per day

The GSM terminal also intelligent to provide least cost call routing (LCCR). When customers calling local city call where landline is cheaper at USD0.04 versus mobile at USD0.10, the GSM terminal will dial using telecom line to call out instead of GSM network

Following are the details of the cost saving benefits that can be capitalized using gsm gateways on the Epabx for Outbound STD/ISD CALLS:

1. For all outgoing calls to any mobile number of GSM operator a flat rate of USD0.05 – USD0.20 is offered, therefore if 5,000 minutes of calls are made to outstation call mobile numbers i.e. 0.30 cents per call, the Telecom landline STD bill would amount to average of over USD 1,5000/- per month as against the same would be under USD500 – USD1,000/- using the fixed cellular terminal system connected to the EPABX. This can result in cost saving of 50% on all STD call cost to any mobile number

2. For telecom landline International Calls (IDD), for example the rate between USD0.50 – USD4.00 to any country of the world whereby assuming 1000 minutes of IDD call the bill would be USD500 – USD2,000 as against the same can be USD0.30 – USD0.50 effective of over 1000% on International (IDD) call costs using FCT unit

Following are the cost saving benefits that can be capitalized using Fixed Cellular Terminal on the Epabx for GSM Network

1. Whenever any outbound calls are made from the any corporate office from the desk phone to any GSM operator mobile phone, Subscriber the call will be routed through the GSM terminal unit connected to the EPABX whereby your company will only pay for USD 0.15 that would have been the cost per minute. We estimate a call traffic of at least 400-500 minute daily thereby the customer only paying USD60-70 per day compare to landline where is USD0.30 and need to pay for at least USD120 - 150 per day using FCT unit

2. Similarly in the inbound call traffic scenario whenever any GSM Operators customer is not in the office and wants to speak to any employee without the mobile, he/she simply dial the designated telecom line in the office which will ring on the EPABX and further can any extension can be reached through the IVR whereby need to pay USD0.15 per minutes to landline for the outgoing call. With the FCT unit, your company incurs no charges at all. This is because some of the GSM operator offer calling to the same operator with no cost. For examples, a lot of gsm operators offer calling from GSM main line to sub–lines with no extra charges. We estimate huge savings here with inbound call traffic of 500 minutes from multiple GSM callers; the company can save at least USD 80 per day. i.e USD 2,400 per month

Technical Specifications For GSM Terminal

- Environmental Temperature: 0 ~ +50ºC
- Relative Humidity: 10% ~ 85%
- Air Pressure: 86Kpa ~ 106Kpa
- Environmental Noise: <= 60dB(A)
- Working Frequency: GSM 900/1800MHz or GSM 850/1900Mhz or 3G 2100Mhz
- Stability of Frequency: better than 2.5PPM
- Signal Sensitivity: -103dBM
- Transmit Power: <2W
- Power Adapter: Input: AC110-240V, 50/60Hz. Output: DC12V, 1.5A